24V DC SANYO Denki Hybrid Stepper Motor 103h7123/5640 NEMA 23 Stepping Motor DC Step Motor

• Application: Nc Machine Tool
• Speed: Constant Speed
• Number of Stator: Two-Phase
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 103H7123/5640
• Function: Control
• Number of Poles: 2
• Operate Mode: The Three Single Phase
• Type: Magnetic-Electric
• Certification: ISO9001, CCC
• Brand: SANYO
• Transport Package: Carton
• Specification: NEMA 23
• Trademark: SANYO Denki
• Origin: Cheng Du
• Production Capacity: 5000 Pieces /Year
• Package Size: 50.00cm * 60.00cm * 60.00cm
• Package Gross Weight: 60.000kg
• Lead Time: 10 days (1 - 1000 Pieces) ; To be negotiated ( > 1000 Pieces)

Product Description

 

Product Description

 1.Rated Characteristics: 

	Phases	2
	Step Angle	1.8	°
	Volts	5.7	V DC
	AMPS	1	A/phase
	D.C Resistance	5.7	Ω±10% at 25ºC
	Coil Inductance	29.4	Mh±20% at 1K Hz, 1 V [RMS]
	b Holding Torque	141.6	oz.in (1.0 N.m)
			at I=1 A/phase 2Ex
Note1.	Pull out Torque	110	oz.in (0.78 N.m). at 200 pulse/s
		©	Inertial Load 14.2 oz.in² (2.6×10−4Kg.m² )
		©	Inertial of Rubber coupling is included
Note1.	Max. Starting Rate	640	pulse / s Min. at No Load
Note1.	Max. Slewing Rate	800	pulse / s Min. at No Load
Note2.	Positional Accuracy	±0.054	°(0.108° Spread Max.) 2Ex.
	Coil Temperature Rise	80	K Max.
	Rotor Inertia	1.15	oz.in² (0.21×10−4Kg.m² ) Nominal
	Insulation Class	B
©	Allowable Thrust Load	15	N
©	Allowable Radial Load	56	N Load to Shaft End.
	Note1. Sanyo Standard 2 Phase excitation drive circuit was used E=24V [DC], I=1 A/phase.(AVERAGE VALUE)
	Note2. Mount A motor on 6.3×6.3×2.4t(160×160×6t) Aluminum heat sink and energize a coil at 2 phase excitation, I=1 A/phase constant.
	Note3. Center hole on the shaft end is not always made.
©	Note4. A color scheme of lead wire of motor's outlet is discretion.

 

2. Wiring Connection	3. Direction of Rotation
	When a motor is sequenced as shown in the table bellow, the shaft rotation must be clockwise when you see from suface ®side
				RED	BLUE	YELLOW	ORANGE
	STEP		1	Θ	Θ	⊕	⊕
			2	⊕	Θ	Θ	⊕
			3	⊕	⊕	Θ	Θ
			4	Θ	⊕	⊕	Θ

 

4.Frequency-torque characteristics

Constant current circuit
Surpply Vottage:	DC 24 V
Coil Current:	1A/ Phase
Full step 2 Phase on
	JL=2.6×(1÷10000 )kg.m²
fs: Maximum automatic start frequency at no-load

Installation Instructions

5.External Dimension: